Object Details
- Manufacturer
- Rocketdyne, Division of North American Aviation Co.
- Summary
- This is a 25 pouind thrust RCS (Re-entry Control System) rocket motor, or thruster, for the Gemini spacecraft. The RCS thrusters controlled spacecraft's attitude (roll, pitch, and yaw). They were fixed thrust, cold nitrogen gas pressurized, self-contained propulsion systems using storable, hypergolic (self-igniting) propellants of nitrogen tetroxide and monomethyl hydrazine and therefore had no separate ignition system.
- On 24 February 1962, the primary contractor for the Gemini spacecraft, the McDonnell Aircraft Corporation, awarded a subcontract to North American Aviation Company's Rocketdyne Division, for the two liquid propulsion systems for the spacecraft. One was the RCS, while the other was the orbital attitude maneuvering system (OAMS), which controlled the movement of the craft. RCS thrusters were very similar in appearance and power to the 25-lb thrust OAMS units and were located forward of the crew compartment in an independent module. The RCS consisted of a pair of completely independent systems, each having eight 25-pound thrusters fired in groups. The RCS performed up to expectations in all the Gemini flights from Gemini III from March 1965, up to the final Gemini flight (Gemini XII) in November 1966.
- McDonnell Douglas donated this motor to the Museum in 1968.
- Credit Line
- Gift of McDonnell Douglas Corporation
- 1965
- Inventory Number
- A19690069000
- Restrictions & Rights
- Usage conditions apply
- Type
- PROPULSION-Rocket Engines
- Materials
- Chamber, stainless steel; nozzle insert, phenolic. Interior of nozzle likely contains ceramic insert at top of nozzle and asbestos wrap and glass wrap as liners close to metallic walls of chamber; with six-side red plastic nozzle protective cover; rubber gasket under cover; clear, six-sided plastic desiccant container on protective cover; two yellow plastic protective caps over two small pipes and two black plastic wrappings over ends of two other small pipes.
- Anodized Aluminum
- Steel
- Plastic
- Foam
- Paper
- Adhesive
- Phenolic Resin
- Dimensions
- 11 3/4" x 4 1/8" x 4 5/8"
- Country of Origin
- United States of America
- See more items in
- National Air and Space Museum Collection
- National Air and Space Museum
- Record ID
- nasm_A19690069000
- GUID (Link to Original Record)
- http://n2t.net/ark:/65665/nv9cb03f5d1-ebcc-4e7a-ad76-ccaafd632e79
Related Content
